Bertazzoni MO30STANE Use and Care Manual download pdf (Page 6)

UNPACKING AND EXAMINING YOUR OVEN

Remove all packing materials

from inside the oven cavity;

however, DO NOT REMOVE

THE WAVEGUIDE COVER,

which is located on the right

cavity wall. Read enclosures

and SAVE the Operation

Manual.

Remove the feature sticker, if

there is one, from the outside

of the door.

Hinges

Door seals

and sealing

surfaces

Safety

door

latches

Check the oven for any damage, such as misaligned or bent

door, damaged door seals and sealing surfaces, broken or

loose door hinges and latches and dents inside the cavity or

on the door. If there is any damage, do not operate the oven

and contact your dealer or Bertazzoni Authorized Servicer.

CHOOSING A LOCATION

FOR YOUR OVEN ON THE COUNTER

You will use the oven frequently so plan its location for ease

of use. It’s wise, if possible, to have counter space on at least

one side of the oven. Allow at least 2 inches on the sides, top

and at the rear of the oven for air circulation.

CHOOSING A LOCATION

FOR YOUR OVEN IF BUILT-IN

Your microwave oven can be

built into a cabinet or wall using

a Bertazzoni built-in kit.

Your microwave oven can be

built into a cabinet or wall by

itself or above any electric wall

oven or warming drawer using

Bertazzoni’s built-in kit FR30

PRO B.

Your microwave oven cannot

be built-in above any gas wall

oven.

Trim Kit Frame Assembly

Oven Front

See Figure 1 for proper location when building in above an

electric wall oven. Carefully follow both the wall oven installation

instructions and Bertazzoni’s Built-in Kit instructions. Be sure

that the clearance of the oor between the wall oven and the

microwave oven is minimum of 2 inches.

INSTALLATION INSTRUCTIONS

Figure 1

The opening in the wall or cabinet must be within the following

dimensions:

Figure 2

A HEIGHT : 16

/4" to 17"

B WIDTH : 24

/8" to 24

/16"

C DEPTH : minimum 20"

Outlet should NOT be in the shaded area as indicated on

Figure 2. If the dimension of DEPTH (C) is more than 21", the

outlet location may be any area on the rear wall.

The oor of the opening should be constructed of plywood

strong enough to support the weight of the oven and oor

load (about 100 pounds). The oor should be level for proper

operation of the oven. Be sure to check the local building code

as it may require that the opening be enclosed with sides,

ceiling and rear partition. The proper functioning of the oven

does not require the enclosure.

The kit includes all the neccessary parts and easy-to-follow

instructions for installation as well as location of the power

supply.

The ease of assembly for these kits will allow installation into

an existing wall opening in less than an hour if power outlet

is already properly located. All it takes are four steps and a

Phillips screw driver.

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Comments to this Manuals

No comments

Bertazzoni MO30STANE Use and Care Manual Page 6

Comments to this Manuals

Related products and manuals for Microwaves Bertazzoni MO30STANE