Bertazzoni REF36X Use and Care Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
Take out, clean and install the ice cube box
If the ice maker isn't used for a long period, ice cubes that
are just produced might have unpleasant smell. You must
take out and clean the ice cube box.
Open the upper drawer in the freezer compartment, rotate
the knob of ice maker counterclockwise by 90, turn the
handle from the horizontal position to vertical position to
release the lock (as shown in Fig. 1 of Pg. 14), pull it out (as
shown in Fig. 2 of Pg. 14) and take out the ice cube box.
Rinse the ice cube box with warm water (belo
w 60°C) and
don't use detergent.
Dry the ice cube box completely in air in case that water
droplets in the ice cube box might cause abnormal
functioning of the ice maker.
When the ice maker can't move, separate the ice maker as
shown in Fig. 1 and Fig.2. Then install after ice cubes are
melted.
Insert the ice cube box onto the rack according to original
sequence and rotate to the locked position.
Fig.3
Locked status
Fig.3
Unlocked status
Take out and install the ice maker
When the ice maker isn't used, it could be taken out and the
vacated space could be used as a part of the freezer
compartment.
Push the Ice Maker button on the control panel at the
refrigerator door and the icemaking sign disappears.
Open the door and take out the drawer.
Pull the ice-maker out (as shown in Fig.1), and then
downwards, so that the ice maker is unhooked (as shown in
Fig. 2).
Pull down the ice maker's power plug so that it is detached
from the ice- maker's power socket (as shown in Fig. 3)
Install the ice
maker into the original position, push the Ice
Maker button, the ice-making symbol appears.
Close the door after the ice maker is installed to the proper
place, otherwise, it might damage the ice maker.
9
10. When freezer compartment set temperature between
-13~-18, when press Ice-making mode, the
temperature show -18 on display automatically.
11. When in ECO mode runing, then press Ice-making
button, Ice-making mode will be prior to ECO mode,
temperature will be automatically adjusted to -18
in the display.
12. The frequency for door opening/closing during ice
maker running period will influence the circle for ice
making.
If you did not use the fridge for a long time, you need to get
the water out of the ice-maker when using again, and clean
the ice-maker to make sure the ice is pure.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments