Bertazzoni MAST486GGASXE User Manual download pdf (Page 15)

/ Installation

INSTALLING THE LEGS

Bertazzoni ranges must be used only with the legs

properly installed.

Four height-adjustable legs are supplied with the

range in the polysterene container situated over

the appliance.

Before installing the legs, position the appliance

near its ﬁ nal location as the legs are not suitable

for moving the appliance over long distances.

After unpacking the range, raise it enough to in-

sert the legs in the appropriate receptacles situa-

ted on the lower part of the appliance. Lower the

range gently to keep any undue strain from legs

and mounting hardware. If possible use a pallet or

lift jack instead of tilting the unit.

Adjust leg height to the desired level by twisting

the inside portion of the leg assembly until the pro-

per height is reached. Check with a level that the

cooktop is perfectly level.

INSTALLING THE WORKTOP

FRONTGUARD

To increase the clearance between the front edge

of the worktop and the burners, it is possible to

install a front guard for the worktop.

To install the front guard,

• Locate the two ﬁ xing holes on the end of the

front guard.

• Locate the two ﬁ xing holes on the bottom facet

of the worktop

• Fix the front guard with it’s two screws

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

No comments

Bertazzoni MAST486GGASXE User Manual Page 15