Bertazzoni X304GGVRO Installation Manual download pdf (Page 19)

Note: The use of a gas cooking appliance produces heat and humidity in the room where it is installed. Therefore, proper

ventilation in the room is needed and natural ventilation openings must remain unobstructed and activating the

mechanical exhaust fan/range hood. Intensive and continuous use of the appliance may require additional ventilation, for

example by opening a window, or increasing the power of the mechanical exhaust fan/range hood, if installed.

Note: the cooker is equipped with cooling fan

starting each time gas oven/broiler are in operation. The cooling

air frow come outside from the space existing between control and panel oven door avoiding the overheating

of their external surfaces during oven/broiler use.

CLEANING THE APPLIANCE:

Never use abrasive cleaners

Before cleaning the appliance it should be disconnected from the power supply.

Cleaning the work surface: periodically clean the burner heads, the cast iron pan supports and the burner caps using

warm water.

Any spillage must always be removed as soon as possible using a rag.

If it become difficult to open or close a valve, do not force it, but immediately request the assistance of the

technical service personnel.

Cleaning the enamelled parts: Enamelled parts should be cleaned frequently with soapy water. Never use abrasive

powder. Do not leave acidi or alkaline substances on the enamelled parts (such as vinegar, lemon juice, salt, tomato

sauce, etc.) and do not wash the enamelled parts while they are still hot.

Cleaning the stainless steel parts: Clean the parts with soapy water and dry them with a soft cloth. The shine is

maintained by periodically using specific stainless steel cream cleaner. Never use abrasive powders. Use specific

stainless steel cream cleaner to eliminate the glue remains afther the elimination of the blue plastic protection film on the

worktop after installation.

Cleaning the burner caps: Lift the burner caps from the burner heads and wash them in soapy water and dry

thoroughly. Before replacement on the burner head ensure that the holes are not clogged.

Cleaning the inner glass door: Clean the glass with warm soapy water using a sponge. A spatula can be used to

remove burner fat if used gently.

ATTENTION: while cleaning the door make sure to avoid any spillage in the venting holes on the top part of the door. To

clean inside the door it is necessary to disassemble the door through a service engineer.

ATTENTION: for further details about cleaning of the appliance, please contact your applliance retailer.

AFTER SALE SERVICE:

Please note here below details for after save service.

Refer to warranty certificate for warranty condiftions

Dealer /Importer: Name, address, phone

MANUFACTURER:

BERTAZZONI SPA

VIA PALAZZINA, 8 – 42016 – GUASTALLA (REGGIO E.) ITALY

Tel. 0522/226411 – telefax 0522/226440 – http://www.bertazzoni-italia.com

SERVICE CENTERS

Name Phone

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

No comments

Bertazzoni X304GGVRO Installation Manual Page 19