Bertazzoni PM360IGX User Manual download pdf (Page 8)

SET THE COOKING TEMPERATURE AS FOLLOWS

Set he heat setting the control knob.

OFF= element off Led indicator

1= lowest setting H = Residual heat

9= highest setting B = Powerboost Function

B= Powerboost function = Power ON

A= Heating accelerator

These knobs provide control of the induction cooking zones above each knob there is indication of the zone

controlled..

Push and turn the knob to the right to set the zone's operating power; the settings range from a minimum of

1 to a maximum of 9. (fig.15-16-17)

Heating accelerator

Each cooking zone is equipped with a heating accelerator.

This system allows the zone to be operated at peak power for a time proportional to the heating power

selected.

To start the heating accelerator, turn the knob to the left, select setting "A" and then release.

You now have 3 seconds to select the heating setting between 1 and 9.

While the heating accelerator is in operation, the heating level can be increased at any time. The "full power"

time will be modified accordingly. If the power is reduced by turning the knob anticlockwise, the heating

accelerator is automatically deactivated.

Powerboost Function

The power function allows the user to operate each heating zone continuously at the maximum power for a

time of no more than 10 minutes. This function can be used, for example, to bring a large amount of water to

the boil in a hurry, or to turn up the heat under meat.

Push and turn the knob clockwise and set heating level 9, then use the knob to set the "B" position and

release il. "B" appears on the corresponding zone display.

After 10 minutes, the power is reduced automatically, "B" led is switched off.

However, the power function can be turned ott at any time by reducing the heating level. .

When the power function is selected for one heating zone, the power absorbed by the second zone might

be reduced to supply the maximum available energy to the first zone.

If a pan is removed from the cooking zone while the power function is on, the function is switched off.

Child lock

The child lock function prevents switching on of the control unit, to avoid unwanted operation, for example by

children, While child lock is activated, no cooking zone can be used.

The child-lock mode is activated by overwinding the two knobs in anti-clockwise direction for mode than 1,5

secs-alternatively: one knob for more 5 secs; AND less than 30 secs to avoid failure detection.

The child-lock is disabled in the same way.

Aktivation/disabling is only possible if both knob input units are in zero position.

Type of pans

This type of appliance can only operate with pans of special kinds.

The bottom of the pan must be iron or steel/iron to generate the magnetic field necessary for the heating

process

Vessels made from the following materials are not suitable:

 glass;

 porcelain;

 pottery;

 steel, aluminium or copper without magnetic bottom;

To check that a pan is suitable, simply piece a magnet close to its bottom:

if the magnet is attracted, the pan is suitable for induction cooking.

The pans used for cooking must have certain minimum diameters to ensure satisfactory operation.

Pans larger than the cooking zones can also be used, but it is important to ensure that the bottom of the

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Bertazzoni PM360IGX User Manual Page 8

Comments to this Manuals

Related products and manuals for Cookers Bertazzoni PM360IGX